previous topic :: next topic |
Author |
Message |
Ryan
Since 14 Jul 2005
536 Posts
Oregon
Addicted
|
Tue Oct 23, 18 10:33 am Gary Swanson |
|
|
Anyone know if Gary Swanson is still around town? I know he often heads south this time of year.
I have a board that needs repair and want to use him....if he is still around. |
|
|
Kmun
Since 05 Jul 2009
250 Posts
Obsessed
|
Wed Oct 24, 18 9:36 am In town but probably not... |
|
|
My bet is Gary is too busy with his regular job to repair boards. At least he was not taking on side work this mid summer when I needed a fifth fin box installed in my quad.
1. Perhaps Art at Northpacific has a partner who will repair your board.
2. Check with Brian Hiend at Open Ocean, Lyle.
http://www.openocean.com/index.html |
|
|
wylieflyote
![](images/avatars/1177322629499ade194d8c8.jpg)
Since 30 Jun 2006
1634 Posts
Puget Sound & Wa. Coast
XTreme Poster
|
Wed Oct 24, 18 9:47 am |
|
|
Heard on the beach that Brian is retiring. _________________ CGKA Member
-------
Kip Wylie |
|
|
DrewB
![](images/avatars/595357565486a7c50a04fd.jpg)
Since 16 Aug 2006
381 Posts
PDX
Obsessed
|
Wed Oct 24, 18 7:07 pm |
|
|
Gary has moved on from board building and repair. |
|
|
Ryan
Since 14 Jul 2005
536 Posts
Oregon
Addicted
|
Thu Oct 25, 18 6:39 am board repair |
|
|
I spoke with Art yesterday and reached out to both Gary and Brian with no response yet. Any other skilled board repair folks around that I could reach out to?
Sounds like we are loosing quite a bit of knowledge with Brian and Gary hanging it up. Art doesn't do much in the way of board repair.
Bummer, I still remember the first Cascade windsurf board I rode in the early 90's at Viento. Gary has been doing it for a while! |
|
|
wylieflyote
![](images/avatars/1177322629499ade194d8c8.jpg)
Since 30 Jun 2006
1634 Posts
Puget Sound & Wa. Coast
XTreme Poster
|
Thu Oct 25, 18 2:46 pm Re: board repair |
|
|
Ryan wrote: |
Bummer, I still remember the first Cascade windsurf board I rode in the early 90's at Viento. Gary has been doing it for a while! |
"When the Gorge goes to Gas... I'm going to Glass"
I loved my Cascade.
Kip _________________ CGKA Member
-------
Kip Wylie |
|
|
dangler
![](images/avatars/84651079050d3b89030cef.jpg)
Since 26 Feb 2006
1744 Posts
WINDY SPOTS
XTreme Poster
|
Thu Oct 25, 18 3:25 pm Brian |
|
|
wylieflyote wrote: | Heard on the beach that Brian is retiring. |
So he can spend more time with his remaining limbs" Dumbledore _________________ Kite Repair? AND LABRADORS Call me.(509) six 37-four five 29 |
|
|
fatstixs
Since 02 Aug 2007
55 Posts
The Gorge
|
Thu Oct 25, 18 4:30 pm Give Pierre a try for board repairs. |
|
|
Give Pierre a try for board repairs.
He did a great job on my SUP that had a cracked rail.
His phone number and contact information is at Big Winds.
Ride on! |
|
|
Nevo
Guest
|
Fri Oct 26, 18 5:36 am |
|
|
I used Willy from Low Tide Ding Repair. His work was awesome, fast, affordable. A few of my friends went there after me and also got their boards fixed up and were excited about it as well.
Here's his instagram link which has additional contact info in it:
https://www.instagram.com/lowtide_dingrepair/?hl=en |
|
|
bambam
Since 15 Mar 2005
760 Posts
Hood River
Photographer
|
Fri Oct 26, 18 8:05 am |
|
|
Gary Swanson... Ha, he was the source of my nickname "Bam Bam" so so so long ago!!! |
|
|
wylieflyote
![](images/avatars/1177322629499ade194d8c8.jpg)
Since 30 Jun 2006
1634 Posts
Puget Sound & Wa. Coast
XTreme Poster
|
Fri Oct 26, 18 8:41 am |
|
|
bambam wrote: | Gary Swanson... Ha, he was the source of my nickname "Bam Bam" so so so long ago!!! |
Always wondered about this. You probably don't recall rescuing me around 1992 off of Honeybuns Maui. _________________ CGKA Member
-------
Kip Wylie |
|
|
bambam
Since 15 Mar 2005
760 Posts
Hood River
Photographer
|
Fri Oct 26, 18 9:41 am |
|
|
Ha, that was you!!! Definitely remember the rescue...
I also was rescued a lot on that trip.. I broke three masts one day and ended up with a 5.0 sail with lots of holes in the leading edge mast sleeve... What a fun trip... and the poor rescue guys on the jet ski got to know my first name that day.... "BAM"... |
|
|
shred_da_gorge
Since 12 Nov 2008
1257 Posts
Local, not Low Cal
XTreme Poster
|
Mon Oct 29, 18 8:58 am |
|
|
I second the recommendation for the crazy Frenchman (Pierre). He's fixed delams and glassed boxes for me in years past, does stellar work. |
|
|
Ryan
Since 14 Jul 2005
536 Posts
Oregon
Addicted
|
Tue Oct 30, 18 8:01 am Pierre contact |
|
|
Anyone have Pierre's contact info. I'm in PDX. |
|
|
bfb38
Since 02 Sep 2016
75 Posts
|
Tue Dec 04, 18 7:12 am Pierre |
|
|
Pierre prefers to be contacted, pick up, drop off, and charge customers via big winds. His work is phenomenal. |
|
|
Ryan
Since 14 Jul 2005
536 Posts
Oregon
Addicted
|
Tue Dec 04, 18 2:50 pm yes |
|
|
bfb38 - yes I would like to contact him, as you suggest, he 'prefers to be contacted' before he starts any work.
Does anyone have is phone or email? |
|
|
shred_da_gorge
Since 12 Nov 2008
1257 Posts
Local, not Low Cal
XTreme Poster
|
Mon Dec 10, 18 6:30 pm |
|
|
Ryan, sent you PM with Pierre's number. |
|
|
|